Next, a pry bar helped to pull the two halves away from the wall for disposal. Since we were replacing an old tub, this project required no changes to the floor construction. It should go without saying that the floor should be solidly constructed to support the weight of the tub, water and the person using it. An acrylic tub is not self-supporting, which means it must be supported along its entire bottom with mortar or grout. The tub is designed to install in a recess, where three walls are comprised of stud framing, with the fourth acrylic wall exposed. To remove the old tub, we used an electric grinder with a metal-cutting wheel to cut it in half. The wall sheathing was removed from around the old tub. We purchased our selected plumbing fittings separately.

First step was to scrape off the tile.Īlso, determine ahead of time what items are included in with your tub purchase, and what you need to purchase separately. Our recent bathroom remodel involved removing an old cast iron tub from a tiled surround. Although the crack was minimal, we worried it would spread and result in a leak, so we decided to return the first tub and get a new one from the supplier. On this project, for example, we found that a corner of the tub was damaged-probably crunched by a forklift during shipment. It’s important to unpack and carefully inspect your new tub upon delivery. Follow all codes for building and plumbing. Local building codes vary by location, and you might need a permit for this project in your area. The rest of the job entails fitting the tub snugly within the surround, supporting it from below, and ensuring the walls will direct water into the basin. A new tub will come with detailed instructions concerning the tub’s pipe connections. The plumbing phase of the project will require careful measurements and secure connections.

This article covers a basic overview of what the project involves, but product details may vary among manufacturers.Īfter removing the old tub, the most challenging aspect of installing the new one is alignment of the tub’s plumbing components with the drain of the house. Tubs are available in a number of different designs, and this project covers the American Standard Saver Tub (available at Lowe’s), which is designed to be installed in an alcove and surrounded on three sides by stud walls. Alternative Heating & Fireplace Insertsĭuring a recent bathroom remodel, we had the opportunity to replace cast-iron tub with a new acrylic bathtub.

Install mirolin showers reviews